I DID manage to get almost everything on my checklists finished for DragonCon at least. I decided to forego adding fiber optics to the wig for now, but it’s all good.

Here’s what I managed to do and where to go from here.

Ghost Agatha:

  • Finish adding bias tape to left armhole
  • Tack down chiffon at front on the inside
  • Add snaps to bolero, jacket, bodice and chiffon skirt
  • Finesse the edges found and tack down tabs to jacket skirt.
  • Wig:
    • Electronics (All in Keep file)
  • Things to tweak:
    • Add pocket to inner coat for battery pack
    • Swap out microchip controller to a bigger battery pack. The standard ones die in about 3hrs. Lame. (To be fair, I am running solid white so that is basically pushing out max power for this setup).
      • 3D print housing to hold 10000mAh flat battery pack + internals
      • SOLDER ALL THE THINGS!
    • MORE SNAPS! Add snaps to gloves and bolero to prevent slipping (oops, they used to fit perfectly, now they’re too big).
    • Find a better way to light the brooch from behind (or just dim it a bit). My whole damned neck and under face were alight. Eek.

Fembot:

  • Finish gathering of chiffon
  • Sew to inside of bra
  • Mark hem and trim
  • Serge edge and roll hem
  • Attach maribou to tatas and hem of dress
  • Add fabric to outside of bra band (holo spandex that matches gloves and booty shorts)
  • Make the booty shorts
  • Machine gun jubblies
    • Cut acrylic tube to 4″ for barrels
    • Sand, paint, and weather barrels
    • 3D print an endcap to go inside the bra with TPU, then superglue barrels into it.
    • Drill hole in the side of housing/tube
    • Add aquarium tubing to barrels, sew elastic loops inside bra to direct tubing.
    • Connect tubing with splitter to main hose from fog machine
    • Add pocket for mini fog machine to go into the back of the booty shorts
      • Finish pocket and connect with heavy duty snaps
  • Style Wig
  • Add maribou to clip for wig and to shoes

Princess Donut:

  • Add buckle to scale mail skirt
    • Holy crap take the straps of the skirt all the way in because suddenly it’s huge on me. o_O

Rideable Mongo:

  • Add feathers to wings, head, and tail
  • Modify legs and feet to be more like cat paws (ADD FELT TOE BEANS)

I’ll do an actual write up with photos and post regarding the con itself soon. I ended up getting con crud immediately after, which put me on my ass for a solid week and a half!

Leave a Reply

hello and welcome!

Here you’ll find costume builds, sewing projects, tutorials, convention adventures, and plenty of fandom-inspired creations. Whether it’s Star Wars, Marvel, Doctor Who, historical fashion, bag making, or the occasional quilting project, I love exploring the intersection of creativity, craftsmanship, and nerd culture.

Pull up a chair, grab a cup of tea, and join me as I share works in progress, finished projects, lessons learned, and the occasional sewing mishap along the way.

Current projects

Discover more from Patchwork Pirate

Subscribe now to keep reading and get access to the full archive.

Continue reading